Changelog

Changelog 1.8.x

[ide] 
* Fix command line: works again with relative paths (regression)
* Fix command line: "--save-prefs" works again (regression)
* AVR toolchain has been updated with a tentative fix for the ld-returned-5-exit-status bug
* Update arduino-builder to 1.3.25
- avoid name clashing for libraries
- cache core archives to speedup compilation consistently
* Allow BoardManager to fetch FreeBSD tools (thanks @kevans91)
* Serial monitor: the input string box is automatically focused when window is selected
* Serial monitor: now can not be opened during upload
* Serial monitor: now properly decodes UTF8 characters (thanks @aknrdureegaesr)
* Serial monitor: added 500k, 1M and 2M baudrates (thanks @dsstutts)
* Updated RSyntaxTextArea to 2.6.1 (textarea component)
* Updated jmdsn (mDNS discovery)
* Allow plugins to attach a listener to compile progress (thanks @tomneutens)

[core]
* Add Atmel-ICE and JTAGICE3 programmers for AVR chips (thanks @matthijskooijman)
* AVR: Set unused bits of extended fuse to 1, should remove some avrdude warning during burn bootloader (thanks @descampsa)
* AVR: USB: send ZLP when needed (allows full 64 bytes packets)
* AVR: USB: use IAD descriptors instead than Generic (thanks @cuitoldfish)

[other]
* SAM platform source code has been moved to its own repository (https://github.com/arduino/ArduinoCore-sam) - all PRs and issues have been moved as well
* Update Wifi101 Firmware Updater plugin

[ide]
* Fixed font rendering not anti-aliased on Windows (regression)
* Increased number of colors on serial plotter to 8, thanks @cousteaulecommandant

[libraries]
* Fixed regression in SD library. Thanks @greiman

[ide]
* Linux: running in command line mode doesn't require an X11 display anymore
* "Save as" now clears the "modified" status
* builder: Paths with strange UTF8 chars are now correctly handled
* builder: .hpp and .hh file extensions are now considered valid sketch extension
* builder: core.a is not rebuild if not needed (improve build time in particular for big projects)
* Fixed swapped actions "Copy for Forum" and "Copy as HTML"
* Linux/osx: If an editor tab is a symbolic link it is no more replaced with a real file when saving (see #5478)
* Increased the upload timeout to 5 minutes (it was 2 min, but it may be not sufficient when uploading via UART a big sketch)

[core]
* Added Arduino.org boards
* Added Adafruit Circuit Playground board
* Added "-g" option to linker to keep debug information in the .elf file (see #5539)
* avrdude: Added fake configuration for EFUSE on atmega8 part. This solves a long standing issue with "Burn bootloader".
Thanks @rigelinorion, @awatterott

Changelog 1.7.x

[ide]
* Arduino17 application directory

[libraries]
* upd braccio library to 2.0.0
* fix wire library - freq restored to 2
* upd eeprom library to 2.0.0

[core]
* upd SAMD compiler flag -MMD
* fix RTC library moved into SAMD core libraries
* upd RTC library new alarmClearFlag fuction
* fix Server.h - include Print.h

[ide]
* New Board Arduino UNO-WiFi
* New Board Arduino Tian

[core]
* Fixed SAMD serial communication over native port
* Fixed SAMD concat. between string and float
* Fixed SAMD analogWrite function

[libraries]
* Arduino Ciao Library Update 0.0.3
* Arduino Lucky Shield Library Update to 1.0.3
* 'Rest' renamed in 'EnergySaving'
* new Arduino WiFi Library
* 'WiFi' renamed in 'WiFi Shield'
* Updated Firmata library and added SAMD compatibility
* Fixed SAMD Servo, SD and SPI

[core]
* Fixed M0 / M0 Pro i2c communication
* Set Arduino M0 / M0 Pro default analog reference

[ide]
* New Board Arduino Industrial 101
* Introduced buildprefs.txt in the sketch folder by @stevemarple

[libraries]
* Arduino Ciao Library Update 0.0.2
* New Arduino Braccio Library 1.0.1
* New Arduino Lucky Shield Library 1.0.0
* Added Arduino M0 / M0 Pro SoftwareSerial library
* Updated Arduino M0 / M0 Pro RTC library
* Added Arduino M0 / M0 Pro LCD library
* Added Arduino M0 / M0 Pro GSM Shield library

[core]
* Fixed M0 / M0 Pro delay() - support ticket #764877
* Arduino M0 / M0 Pro A0 GPIO Bugfix
* Arduino M0 / M0 Pro Interrupt Bugfix

[libraries]
* Arduino M0 / M0 Pro RTC (Real Time Clock)
* Power management library (Rest) for Arduino M0 and M0 PRO boards

[core]
* Fixed Tx and Rx for M0/M0 Pro

[libraries]
* Added 9AXES support for M0/M0 Pro
* Added TFT support for M0/M0 Pro
* Added RTC support for M0/M0 Pro
* Added Ethernet Library support for M0/M0 Pro
* Added New Arduino Ciao Library

[bootloaders]
* Added Arduino.org Caterina source code
* Added build_all_target.sh to build all bootloader *.hex files
* Added make clean_all command to clean working directory

[drivers]
* Arduino drivers for Windows 10

[core]
* Fixed Serial/Serial5 bug (issue #13) - M0 / M0 Pro
* Fixed Sercom reference in Wire.h - M0 / M0 Pro
* Fixed DHCP Response on Ethernet2 Lib - M0 / M0 Pro

[core]
* Fixed Serial/Serial5 bug (issue #13) in M0 / M0 Pro
* Fixed analogReadResolution in M0 / M0 Pro
* Fixed analogReference in M0 / M0 Pro

[ide]
* modified platform.txt for fix GITHUB issue #3
* add SAM D21 based boards (Zero Pro/ M0 Pro / M0) bootloader burning
* update upload pattern for Zero Pro/ M0 Pro

[bootloaders]
* replace Zero Pro bootloader with M0 pro Bootlolader
* add M0 bootloader

[core]
* Fixed delayMicroseconds for SAMD
* remapped Serial and serial5 for SAMD
* add tone and pulse for SAMD
* fix DAC pinMode for SAMD
* fix variant.cpp (issue #11)

[bootloaders]
* add SD and servo for SAMD

[ide]
* add new arduino yun mini board
* upd atmel driver bundle to version 7.0.712

[bootloaders]
* upd zero pro bootloader: rx/tx now blink during upload

[libraries]
* Cleaned up GSM Shield 2 library code
* Fixed SS pin in the SD library

[ide]
* Fixed a bug that prevented the typing of special characters in the editor of the IDE (https://github.com/arduino-org/Arduino/issues/4)
* Add the new Arduino Leonardo ETH board

[bootloaders]
* Fixed Win 8.1 USB 3.0 bug (Arduino Zero Pro)

[libraries]
* fix BNO055 include in 9 Axes Motion Shield library (@boen)
* add Ethernet 2 Shield library
* add GSM 2 Shield library

[ide]
* add bootloader source code of arduino zero pro

[libraries]
- Update DAC, ADC, PWM, Digital for SAMD

[ide]
- Add openocd and cmsis tool
- Update windows driver with the Zero Pro
- Add Atmel Drivers
- Introduce .bin compiling pattern for Zero Pro (programming port) in platform.txt

Changelog 1.5.x

[libraries]
- Update DAC, ADC, PWM, Digital for SAMD

[ide]
- Add openocd and cmsis tool
- Update windows driver with the Zero Pro
- Add Atmel Drivers

[core]
- gcc: introduce bin compiling for Zero Pro programming port

[ide]
- Added IDE Code signature to Arduino srl
- Change web site references to www.arduino.org

[libraries]
- 9-Axes shield: added libraries and examples

[core]
- added new VID/PID for arduino.org boards

Changelog 1.0.x

- 9-Axes Motion: updated library to revision v8 of the shield. Check of the interrupt based on mcu family instead of board name.

[ide]
- Added IDE Code signature to Arduino srl
- Change web site references to www.arduino.org

[libraries]
- 9-Axes shield: added libraries and examples

[core]
- added new VID/PID for arduino.org boards

 

DISCOVER OUR

WHOLE STORY

About us


GET IN TOUCH

WITH US

Contact us


FIND ALL OUR OPEN POSITIONS AND JOIN US!
 

JOB SEARCH