FAQ

Here is a list of frequently asked questions and answers;It is a very effective form of information that further clarifies, after the official documentation, the recurring doubts on how to use a product, the operation of a procedure, the use of software, etc.

FORUM    SUPPORT

Follow the below guide to solve the issue:

Arduino IDE doesn't work

Please follow these steps before running the Arduino IDE or Arduino Studio on Linux-based operating systems…
Arduino IDE on Linux-based OS

If you don't remember the correct Arduino Yun/Yun Mini board address and you can't access to the board from browser then follow these simple steps…
Board address

To burn the bootloader you have two ways or using an external programmer like Atmel MKII or Atmel ICE, or simply using an Arduino board with AVR microcontroller…

Burn the bootloader using an Arduino board as ISP programmer

Download the last version of Arduino IDE for Windows from the download page and extract it using 7-zip.
When the download finishes, double click the downloaded file to install it...
First steps with Arduino IDE 1.7.x for Windows

The GSM shield communicates with an attached Arduino through the Software Serial library. By default, this communication uses digital pins 2 and 3. On the Uno this works without modification, but to use the Leonardo, Yun, or Mega boards, some slight changes are required…
How to use the GSM shield with another shield

Before to install manually the drives try to disable Driver Signature Enforcement following this guide…
Guide to Disable Driver Signature Enforcement for Windows

If you must flash Atmega 16u2 firmware follow these steps:
- Go to Atmel website and download Atmel Flip…
Guide to reflash Atmega 16u2

If you have this issue on your Arduino Yun/Yun Mini board when you upload a sketch using Arduino IDE via SSH…
Guide to solve uploading sketch on IDE via SSH issue on Arduino Yun or Yun Mini

In this guide it is shown as to realize a connection point to point between an Arduino Yun and a TFTP Server, using a Windows PC…
Guide for Windows user to realize a connection point to point with a tftp server

If you need upgrade the Linino IO from u-boot and you are a Windows user then follow this guide…
Guide for Windows user to upgrade the LininoIO from u-boot

If you are a Windows user then follow this guide:
- First be sure that...
Guide for Windows user to upgrade the u-boot

To properly write the bootloader on your Arduino M0, you need to use a programmer, for example the Atmel-ICE, and the tool provided by ATMEL AtmelStudio...
How to burn the bootloader on an Arduino M0 using Atmel Studio

To import a library on Arduino IDE follow these steps:
- Download the library.
- Open the Arduino.org IDE (you can download it here).
- Select Sketch>Import library>Add library…
How to import a Library on Arduino IDE

What changes if you install LininoIO OS? With LininoIO OS you don't need to write your C code application for the MCU.
It is enough to install LininoIO OS on the MCU side and all of the functionalities, like GPIO, ADC, PWM, I2C, etc. will be exported onto the LininoIO…
How to upgrade an Arduino Yun or Yun Mini to LininoIO

You can to burn the bootloader in two modes or using Arduino.org IDE or AtmelStudio.
If you want use Atmel Studio follow this guide…
How to write the bootloader on Arduino M0 Pro using Arduino IDE

If your Arduino IDE is slow and when it starts up it appears the Launch4j error, as shown in the below picture…
Launch 4j error

If you ever bump into this issue while running the IDE, you need to build from source the old libgcrypt11 to properly run ArduinoStudio. Taking for granted that you are running a Ubuntu-based distro, please first satisfy the build dependencies with…
LINUX error while loading shared libraries: libgcrypt.so.11 cannot open shared object file: No such file or directory

To install manually the drivers of an Arduino boards on Windows follow these steps:
- Connect the board to PC via USB cable.
- Select Device Manager>Ports(COM & LPT)...
Manual installation of drivers on Windows

If you have a board that can't load the sketch then try to follow these steps:
- Connect the board to PC;
- Open the Arduino IDE;
- Select your board from Tools>Boards menu…
Rescue guide for microcontroller ATMega 32u4

If you have a board that can't load the sketch then try to follow these steps:
- Connect the board to PC;
- Open the Arduino IDE;
- Select your board from Tools>Boards menu…
Rescue guide for microcontroller ATSAMD21G18A

DISCOVER OUR

WHOLE STORY

About us


GET IN TOUCH

WITH US

Contact us


FIND ALL OUR OPEN POSITIONS AND JOIN US!
 

JOB SEARCH