Arduino Function: Servo.write

Description

Writes a value to the servo, controlling the shaft accordingly. On a standard servo, this will set the angle of the shaft (in degrees), moving the shaft to that orientation. On a continuous rotation servo, this will set the speed of the servo (with 0 being full-speed in one direction, 180 being full speed in the other, and a value near 90 being no movement).

Syntax

servo.write(angle)

Parameters

  • servo: a variable of type Servo
  • angle: the value to write to the servo, from 0 to 180

Examples

#include <Servo.h>

Servo myservo;

void setup() {
myservo.attach(9);
myservo.write(90); // set servo to mid point
}

void loop() {}


Based on the reference originally written by Arduino Community,  wiring.org.co and  arduino.cc