Arduino Function: SoftwareSerial.print

Description

Prints data to the transmit pin of the software serial port. Works the same as the Serial.print() function.

Parameters

Same as Serial.print()

Returns

 print() will return the number of bytes written, though reading that number is optional

Examples

SoftwareSerial serial(10,11);
int analogValue;

void setup() {
serial.begin(9600);
}

void loop() {
//Read the analog input on pin 0:
analogValue = analogRead(A0);

// print it out in many formats:
serial.print(analogValue); // print as an ASCII-encoded decimal
serial.print("\t"); // print a tab character
serial.print(analogValue, DEC); // print as an ASCII-encoded decimal
serial.print("\t"); // print a tab character
serial.print(analogValue, HEX); // print as an ASCII-encoded hexadecimal
serial.print("\t"); // print a tab character
serial.print(analogValue, OCT); // print as an ASCII-encoded octal
serial.print("\t"); // print a tab character
serial.print(analogValue, BIN); // print as an ASCII-encoded binary
serial.print("\t"); // print a tab character
serial.print(analogValue/4, BYTE); // print as a raw byte value (divide the
// value by 4 because analogRead() returns numbers
// from 0 to 1023, but a byte can only hold values
// up to 255)
serial.print("\t"); // print a tab character
serial.println(); // print a linefeed character

// delay 10 milliseconds before the next reading:
delay(10);
}


Based on the reference originally written by Arduino Community,  wiring.org.co and  arduino.cc